Advanced Logic Research Solo 9100 Spécifications télécharger pdf (Page 21)

10 Maintaining and Troubleshooting Your E-4200 System

Replacing the mid-tower case cover

You need a grounding wrist strap and a Phillips screwdriver to close the

case.

If you installed additional external drives, then you must replace the

bezel. Hook the tabs at the bottom of the front bezel into the slots in

the chassis. Then push the bezel into the chassis until the spring clips

snap the bezel in place.

Place the left side panel onto the chassis and slide the panel toward the

front of the chassis. Replace the two screws that attach the panel to the

chassis.

Place the right side panel onto the chassis, making sure the panel fits

into the rails on the chassis. Slide the panel toward the front of the

chassis until the tabs on the panel fit under the rim of the chassis.

Replace the two thumbscrews that attach the panel to the chassis.

To replace the mid-tower case cover

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 107 108

Pas de commentaire

Advanced Logic Research Solo 9100 Spécifications Page 21