Advanced Logic Research Solo 9100 Spécifications télécharger pdf (Page 40)

System Components 29

Close the case, reconnect the power cord, and turn on the system.

Your system now detects the speed of the new processor.

Installing memory

The Synchronous Dynamic Random Access Memory (SDRAM) Dual

In-line Memory Modules (DIMMs) supported by your system board

conform to the following standards:

•

3.3 V, 168-pin unbuffered SDRAM

•

16 MB and 32 MB (16 bit technology)

•

64 MB and 128 MB (64 bit technology)

•

Single- or double-sided configurations

•

384 MB maximum system memory

When you are installing DIMMs, keep the following in mind:

•

You can use 16-MB, 32-MB, 64-MB, and 128-MB DIMMs in any

combination, band, or order to expand the SDRAM up to 384 MB.

•

No jumper settings are required for the memory size or type

because this information is automatically detected by the BIOS.

•

This system board requires 4-clock DIMMs with a clock latency of

2 (CL2), otherwise known as CL24-clock DIMMs.

Turn off the system and disconnect the power cord.

Open the case, observing the Static Electricity precautions in

Chapter 1.

To install DIMMs

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 107 108

Pas de commentaire

Advanced Logic Research Solo 9100 Spécifications Page 40